Train Station Guide Kiosk Board, WF-G3600, AndroidSBC, Bogota

TL;DR: Train Station Guide Kiosk Board

AndroidSBC field desk: guide kiosk rollout map updated across retail, transport, healthcare and hospitality venues serving Bogota, Colombia. The WF-G3600 smart guide kiosk Android motherboard spans the dual-screen smart guide terminal and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, dual independent HDMI plus LVDS, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Bogota and Colombia importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Why a source factory rather than a trading company: the WF-G smart guide kiosk Android motherboard family is designed, laid out, assembled and tested by Wanlin Manufacturing Group in Shenzhen, which means Bogota integrators deal with the people who control the BOM. Custom display interfaces, custom touch controller pairing, custom memory and storage splits, custom dual-screen configurations and custom payment or ID reader interfaces are all changes that happen at the schematic and layout stage rather than as a favour from a middleman. Colombia buyers also get the failure analysis loop: when a board comes back, the report comes from the line that built it, not from a distributor forwarding a ticket. For Colombia importers the working rhythm in Bogota is a sample lot in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.

WF-G3600 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3600 (dual-screen smart guide terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Colombia importers sourcing the WF-G family, the WF-G3600-A variant is the typical configuration for the mall directory and promotion terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Colombia Buyers

The sixth obstacle is lifecycle mismanagement. Bogota programmes that start on a legacy part find themselves two years in with no spare boards, no firmware source and no migration plan, and Colombia venue fit-out cycles are longer than the parts remain in production.

The content stack is open by design. AndroidSBC documents the cloud content management client, the kiosk-mode lockdown layer and the directory and wayfinding interface on the WF-G family, and provides Colombia integrators with a versioned SDK so the Bogota deployment can be extended without forking the image. AndroidSBC has now closed the 1st consecutive quarterly window on this family, with 158600 boards scheduled for Bogota and Colombia on the Cartagena - Shanghai lane as of September 18, 2026.

Competitive Comparison: WF-G3600 vs Competing Smart Guide Kiosk Android Boards

Most Colombia tenders shortlist two or three board vendors, and the shortlist usually collapses on the same axes: how many silicon options one vendor actually controls, how much of the peripheral stack is already written, and how the fleet gets updated after installation. The WF-G family is positioned against those axes for Bogota programmes.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Labour economics keep pushing the same direction. With information desks under staffing pressure in Colombia, venue operators in Bogota are converting more of the orientation moment to self-service: floor directories, tenant finders, route planners, exhibit guides and appointment check-in points. Each conversion is another dual-screen smart guide terminal board, and each one has to be managed as part of a fleet rather than as a standalone screen.

• Mall floor directories and tenant finders: WF-G3600 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3602 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3602 and the industrial WF-G3566 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3566 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

The gap between a market forecast and a Bogota order book is the board count per venue type, and AndroidSBC publishes the per-venue assumptions it uses for Colombia so integrators can sanity-check their own numbers.

Partner Success Story: Deccan Mall Technologies (retail technology integrator)

A Deccan Mall Technologies programme in the India retail and commercial segment illustrates how the WF-G family from AndroidSBC supports Bogota integrators on the ground. Deccan Mall Technologies integrated 158600 WF-G guide boards into mall directories, hospital orientation points and government service counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Deccan Mall Technologies branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus CRC / ANE conformity, all bundled into the Shenzhen source-factory shipment.

Deccan Mall Technologies Solutions Architect for India Retail and Commercial highlighted: Deccan Mall Technologies serves venues across very different power conditions, and the auto power-on after mains failure plus the wide input tolerance on the WF-G board kept 158600 screens in Bogota up through a difficult Colombia summer.

Field Report: directory and promotion terminal deployment at a downtown retail complex

YANTIAN, Shenzhen, September 18, 2026 - Huan Xi, AndroidSBC field desk. The final gate was a driver autoload check: the WF-G3600 boards booted with the full peripheral set attached and enumerated every module before the dual-screen smart guide terminal content service started. The WF-G3600 smart guide kiosk Android motherboard order for Bogota, Colombia cleared the burn-in station on schedule and is en route via the Cartagena - Shanghai lane.

The WF-G3600 dual-screen smart guide terminal production lot includes the WF-G3600-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Colombia integrators, the CRC / ANE conformity plus CRC and ANE homologation with RETIE electrical conformity paperwork is bundled.

Filed by Huan Xi, AndroidSBC field desk, YANTIAN, Shenzhen. Colombia integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3600 Application Scenarios

The WF-G3600 dual-screen smart guide terminal sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3600-A configuration is the typical build for the mall directory and promotion terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3600 plus WF-G3288 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G3399 plus WF-G3600 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G1330 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G1331 plus WF-G3288 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G3399 plus WF-G1331 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3288 plus WF-G1330 carry the guest orientation flow in Bogota.
• Exhibition and museum interpretive display points: WF-G3600 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G1331 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Bogota: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Bogota Buyers

AndroidSBC structures the WF-G guide kiosk programme around three partner tracks for Bogota and Colombia, each with a different entry quantity and a different level of design control.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

AndroidSBC keeps the commercial structure simple for Bogota and Colombia: one family, three tracks, and no penalty for starting small and scaling up later.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a dual-screen guide terminal?

Answer: Yes. AndroidSBC ships the WF-G family with dual-screen guide terminal as a standard configuration; the Rockchip and Allwinner tiers share one firmware baseline, one driver package and one update channel.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: The differences are measurable. RK3588 is 8nm with eight cores, Mali-G610 MP4 and 6 TOPS; RK3568 is 22nm, quad-core A55 2.0GHz, Mali-G52 2EE, 1 TOPS and triple independent output; RK3566 is the same core at 1.8GHz with 0.8 TOPS; RK3288 is a 28nm 32-bit A17 part with the Mali-T764; RK3399 is a 28nm big.LITTLE A72 plus A53 part with the Mali-T860 MP4; T527 is a 22nm octa-core A55 industrial part with 2 TOPS; A133 and H618 are quad-core A53 entry parts. AndroidSBC specifies RK3568 against the workload for Bogota.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Colombia?

Answer: Yes. For Colombia buyers the standard bundle is CE / FCC / RoHS plus CRC / ANE conformity and CRC and ANE homologation with RETIE electrical conformity, routed through Port of Cartagena. AndroidSBC also keeps the EMC, ESD and surge immunity test reports on file for venue property handover in Bogota.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: The sample MOQ on the WF-G family is one piece with a 1-3 day lead; the OEM pilot opens at 100 pieces; the ODM reference design review opens at 500 pieces. Mass production runs on a 15-30 day lead once the BOM is signed off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC ports Android 10 through Android 15, plus Linux, Ubuntu and Debian, on every WF-G tier. Custom ROM work includes the boot animation, the kiosk lockdown layer, the update channel and the peripheral driver package for Colombia deployments.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC handles updates as a supply commitment: a seven-year firmware window, a versioned SDK, staged OTA with rollback, and a documented migration path when a silicon tier reaches end of life. For Bogota estates that removes the usual two-year requalification cycle.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. Shipments can be consolidated into a 3PL or FBA destination for Bogota partners, with carton labelling, palletisation and the CRC / ANE plus CRC and ANE homologation with RETIE electrical conformity paperwork prepared in Shenzhen before the lot leaves.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC runs RMA from the factory, not from a distributor. DOA is replaced on evidence from buffer stock, field failures are analysed by the line that built the board, and the report goes back to the Colombia integrator with the root cause.

Contact AndroidSBC: Start Your WF-G3600 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G family. Bogota integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Bogota and Colombia buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.