RK3568 Government Kiosk Board OEM for Citizen Self-Service, WF-S3399, AndroidSBC, Bogota

TL;DR: RK3568 Government Kiosk Board OEM for Citizen Self-Service

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-S government service board family serving Bogota, Colombia. The WF-S3399 government service kiosk Android motherboard spans the dual-screen high definition service terminal and eleven sister models in the WF-S series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, dual 4K output, HDMI plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-S family from the Longgang source factory in Shenzhen to Bogota and Colombia importers who run citizen service hall, tax and social security counter, certificate printing, identity verification, public information display and outdoor smart city programmes.

About AndroidSBC and the Government Service Kiosk Android Motherboard Family

Public service estates are long-lived. A Colombia hall installed this year is still expected to run in seven years, which is why AndroidSBC locks the WF-S family to a seven-year firmware window and publishes the platform roadmap to Bogota integrators before a tender closes rather than after. For Colombia importers the working rhythm in Bogota is a sample lot in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.

WF-S3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-S3399 (dual-screen high definition service terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Colombia importers sourcing the WF-S family, the WF-S3399-A variant is the typical configuration for the high resolution citizen information terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Government Service Kiosk Android Motherboards for Colombia Buyers

The second obstacle is paperwork. A Colombia tender asks for the conformity file, the EMC report and the board revision history, and a supplier who trades boards rather than builds them cannot produce any of the three on request.

The answer is a documented compliance path rather than a promise. AndroidSBC ships the WF-S family with CRC and ANE homologation with RETIE electrical conformity documentation prepared for Colombia, and the CRC / ANE conformity file travels with the Bogota shipment rather than following it by email three weeks later. The 1st booking window for Bogota stands at 181500 boards as of September 20, 2026, routed to Colombia over the Cartagena - Shanghai lane.

Competitive Comparison: WF-S3399 vs Competing Government Service Kiosk Android Boards

The comparison that matters to Bogota buyers is not board against board but programme against programme: who owns the schematic, who can reproduce a lot in three years, and who answers when an identity reader stops working on a public counter.

• vs single-platform board vendors: the WF-S family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-S family arrives with capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay drivers already integrated, so the {city} integrator writes the citizen service application rather than the driver layer.
• vs boards without unattended-operation features: the WF-S family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-S family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a citizen screen plus an operator screen and a mirrored duplicate.

Global Government Self-Service / Citizen Service / Public Information Terminal Market Trends

Payment and bill-pay terminals are the largest single type of public-sector self-service kiosk at roughly 35 percent of the segment, and dual-screen high definition service terminal programmes in Colombia sit inside that category for most Bogota tenders.

• Citizen service halls and municipal counters: WF-S3399 is the usual starting point for hall rollouts, with the dual-screen WF-S8801 as the citizen plus operator option.
• Tax, social security and housing fund terminals: the mid-tier WF-S8801 and the printing-capable WF-S3600 sister SKUs form the counter ladder, with certificate printing and queue management.
• Outdoor and 24-hour unattended cabinets: WF-S3600 and the industrial sister SKUs cover continuous-operation municipal self-service points across a city estate.

None of this changes the specification logic: Colombia halls still buy on identity peripheral support, thermal fit and update control, and the market data only sets the volume expectation for Bogota.

Partner Success Story: Deccan eGovernance Technologies (state government service integrator)

A recent Deccan eGovernance Technologies deployment in the India government segment shows how the WF-S government service kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Bogota integrators. Deccan eGovernance Technologies commissioned 181500 WF-S government boards across taluk offices, citizen facilitation centres and certificate issuing kiosks.

• OEM relationship: AndroidSBC private-label SKU shipped with Deccan eGovernance Technologies branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus CRC / ANE conformity, all bundled into the Shenzhen source-factory shipment.

According to Deccan eGovernance Technologies Solutions Architect for India Government: Deccan eGovernance Technologies runs outdoor certificate kiosks as well as indoor counters, so the industrial T527 tier on the WF-S family was the deciding factor for the 181500 terminals now deployed across Colombia.

Field Report: dual-screen information terminal rollout at a public security service hall

PINGHU, Shenzhen, September 20, 2026 - Cao Min, AndroidSBC field desk. Each WF-S3399 board in the lot was verified for independent dual display output before packing, because the dual-screen high definition service terminal specification for Colombia calls for a citizen screen and an operator screen. The WF-S3399 government service kiosk Android motherboard order for Bogota, Colombia cleared the burn-in station on schedule and is en route via the Cartagena - Shanghai lane.

The WF-S3399 dual-screen high definition service terminal production lot includes the WF-S3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Colombia integrators, the CRC / ANE conformity plus CRC and ANE homologation with RETIE electrical conformity paperwork is bundled.

Filed by Cao Min, AndroidSBC field desk, PINGHU, Shenzhen. Colombia integrators typically request CE plus local radio interface notification for government service kiosk board deployments.

WF-S3399 Application Scenarios

The WF-S3399 dual-screen high definition service terminal sits inside a twelve-variant WF-S government service kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-S3399-A configuration is the typical build for the high resolution citizen information terminal use case, with identity peripheral driver SDK and staged OTA management bundled.

• Citizen service hall enquiry and queue points: WF-S3399 plus WF-S3601 form the hall entry ladder, with independent dual display output and 4K HDMI.
• Tax, social security and housing fund counters: WF-S3601 plus WF-S3602 are the usual pairing where certificate printing and ID verification run on the same board.
• Immigration and public security checkpoints: WF-S3602 is the dedicated secure identity SKU, with secure boot, trusted execution and an audit trail that survives a power cycle.
• AI identity verification and face recognition terminals: WF-S3566 plus WF-S3288 cover the vision and verification workload on the device.
• Community and neighbourhood service desks: the compact WF-S3399 and the entry-tier sister SKUs serve walk-in enquiry where counter space is limited.
• Outdoor and semi-outdoor municipal cabinets: the industrial T527 sister SKU takes the 24-hour unattended points that see a full seasonal temperature range in Bogota.
• Hall notice and announcement networks: the H618 and A133 sister SKUs drive continuous-play public information screens across a Bogota building estate.
• Document scanning and form filling terminals: WF-S3288 plus WF-S3601 pair the scanner and the signature pad on one board for the Bogota administration.
• Legacy estate refresh programmes: the RK3288 and RK3399 sister SKUs match the mechanical and electrical footprint of existing Bogota hall terminals, so a refresh does not become a redesign.

Partnership Models for Bogota Buyers

Public sector partners in Bogota enter at different stages, so AndroidSBC keeps three tracks open on the WF-S family for Colombia programmes.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

Whether Bogota buyers take a catalogue SKU or a custom carrier board, the firmware baseline, the driver package and the seven-year update window stay identical for Colombia.

Frequently Asked Questions

Does the WF-S government service kiosk Android motherboard family support a dual-screen high definition service terminal?

Answer: Yes. AndroidSBC treats the dual-screen high definition service terminal as a stock case on the WF-S family and validates it on every tier that could plausibly run it, including the entry and industrial parts.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-S family?

Answer: AndroidSBC positions the RK3399 inside a ladder rather than as a flagship, because a Colombia estate almost always contains several job types and buying one tier for all of them wastes budget or under-specifies the identity counters.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Colombia?

Answer: Yes. AndroidSBC supplies CRC and ANE homologation with RETIE electrical conformity documentation for Colombia and bundles the CRC / ANE conformity file into the shipment, which is what a Bogota tender acceptance usually asks to see.

What are the MOQ and lead time for a first order of the WF-S government service kiosk Android motherboard family?

Answer: Sample orders from one piece, OEM from 100 pieces, ODM from 500 pieces, and a 15-30 day mass-production window once the Colombia BOM is signed off. AndroidSBC publishes all four numbers to Bogota buyers up front.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-S family?

Answer: Yes. AndroidSBC develops custom Android ROM, custom Linux BSP, AOSP builds and kiosk-mode images for the WF-S family, including boot animation, pre-installed applications and a custom UI for Bogota and Colombia.

How are software updates and long-term support handled on the WF-S family?

Answer: Updates reach Bogota estates through a staged channel with rollback. AndroidSBC publishes the revision, the Colombia integrator validates it against the identity peripherals, then releases it on their own schedule.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-S family?

Answer: Yes. AndroidSBC ships to Amazon FBA and to 3PL consolidation warehouses, with carton labelling, palletisation and export documentation prepared in Shenzhen for Bogota and Colombia destinations.

How are RMA and DOA replacements handled on the WF-S government service kiosk Android motherboard family?

Answer: DOA replacement ships with the next consignment, and RMA cases are processed against the lot record AndroidSBC maintains for Bogota and Colombia, including the burn-in and peripheral test logs.

Contact AndroidSBC: Start Your WF-S3399 Sourcing Conversation

Bogota integrators can reach the AndroidSBC export desk for the WF-S government service kiosk Android motherboard family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Colombia buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-S family.